Duplex Steel Sheets in Mumbai

Duplex Steel Sheets in Mumbai

Grade 2205 Duplex Steel (UNS S31803)


Duplex Steel Sheets |Duplex Steel Plates | Duplex Steel Coils | Grade 2205 (UNS S31803)

Duplex Steel Sheets / Plates / Coils | Grade 2205 (UNS S31803)

Duplex steels are made of mixed microstructure of austenite and ferrite, usually made of 50/50 mix, however in commercial alloys steel the ratio may vary to 40/60. Duplex stainless steel has approximately two times greater strength as compared to austenitic stainless steels and also enhanced resistance mainly to pitting corrosion and stress corrosion cracking.

They are consists of high chromium 19 to 32% and molybdenum up to 5%. They have lower nickel content compared austenitic stainless steels.
They are generally cost effective due to lower alloy content than similar performing austenitic steels.

Typical Composition of 2205 Duplex Steel:

Chromium:22-23%
Nickel:4.5–6.5%
Molybdenum:3-3.50%
Manganese:2% max
Silicon:1% max
Nitrogen:0.14-0.20%
Phosphorus:0.030% max
Sulfur:0.020% max
Carbon:0.030% max

Mechanical Properties:

GradeDuplex Steel-2205 Grade
Tensile Strength
(MPa) min
655
Yield Strength
0.2% Proof(MPa) min
450
Elongation
(% in 50mm) min
25
Hardness
Brinell max.
293

Common Applications of 2205  Duplex Steel:

Processing equipment
Oil and gas exploration
Flue gas desulfurization equipment
Transport, storage and chemical processing
High chloride and marine environments
Paper machines, liquor tanks,
Bleach washers, pulp and paper digesters

We are one of the most reliable & comprehensive stockholder, supplier & exporter of high quality Grade 2205 (UNS S31803) Duplex Steel Sheets, Plates & Coils.


The sheets procured & supplied/exported  by us are from the leading mills across the globe.

Material Origin:

India,Europe,Korea, United States, Thailand, Taiwan, Japan

Manufacturers:
Acerinox, Aperam, Bahru, Baosteel, DKC, Jindal, Nippon, Outokumpu, POSCO, SAIL,
Thyssenkrupp.

We are able to supply cut to size 2205 grade Duplex steel  sheets & plates (as per your specifications) in any quantities with all the necessary mill test reports.



DUPLEX STAINLESS STEEL SHEETS/PLATES/COILS SPECIFICATIONS:

Grade: 2205 UNS/UNS S32205
Standard: ASTM A240

Surface Finish:
2B, 2D, BA, HL, No.4

Size Ranges :

Sheets:
Thickness: 0.25mm ~ 6.0mm
Width: 600mm ~ 2000mm
Length: 1000mm ~ 10000mm

Plates:
Thickness: 3mm to 100mm
Width: 1000mm to 3000mm
Length: 2438 mm / 3048mm / 6098 mm to 12500 mm

Coils:
Thickness: 0.31mm ~ 12.7mm
Width: 1000mm / 1120mm / 1250 / 1525mm / 2000mm
Length: as per your requirement.

*(Cut to sizes available as per your requirement.)

Types: Flat bars,Strips,Circle, Ring, Profile

PRODUCT MARKING AND MILL TEST CERTIFICATES & REPORTS

All the Duplex Steel products (Sheets, Plates, Coils) supplied by us are procured from A-class mills around the world.

The products are marked according to the international standards format which helps for identification of the Sheets as well is supported with the Material Test Report. It can be easily traced by the mill from which the material is procured.



The marking format:

BRAND – SIZE – SPECIFICATION – GRADE – HEAT NUMBER – LOT NUMBER

We hold the certifications of the world class mill including ISO 9001:2008, OHSAS 18001:2004 , ISO 14001:2007, CE-PED 97/23/EC.